Replaces an existing wall switch and adds an extra switch without new wiring! Our receiver switch replaces your existing switch. The transmitter switch is wireless and can be mounted anywhere you need a second switch. Easily control one overhead light from two locations. Perfect for turning lights on in stairways and hallways. Please note: this is not for use with existing 3-way circuits. Some basic knowledge of wiring is necessary.

Features:

* Easily control an overhead light from 2
locations
* Channel Selectable- Can use up to 4 units
in your home
* Can control up to 350 watts incandescent
light
* Up to 50 foot range
* Rocker switch for easy fingertip control
* Wireless wall switch requires 12 volt
alkaline battery


 

Turn a fixture on and off with a switch! Eliminates the need for a pullchain! Our Screw-In socket receiver screws into your lamp. Mount the transmitter switch wherever you decide. Perfect for closets or overhead lighting that requires a pull chain. Can also be used with traditional table lamps.

Features: * Easily control an overhead light or a table
lamp
* Eliminates need for pullchains
* Channel Selectable- Can use up to 4 units
in your home
* Can control up to 150 watts incandescent
light
* Up to 50 foot range
* Rocker switch for easy fingertip control
* Wall switch requires 12 volt alkaline
battery


 

Never fumble in a dark room again! Turns light on and off with a touch of a switch! Easy installation is as follows: plug in the receiver unit into any standard outlet and mount wall switch at desired location. Or if you prefer, do not mount wall switch and use as a remote control. The HW2170D makes turning on and off lights easy with a simple touch of a switch.

Features:

* Installs easily - no wiring required
* Selectable channels - use up to 4 units in
your home without interference
* Signal passes through walls and floors
* Operational range up to 50 feet
* Rocker switch for easy fingertip control
* Wall switch requires 12 volt alkaline
battery



 

Dims lights with the simple push of a button! The hand held remote not only turns lamp on and off, but offers full dimming range. The unit retains last dimming level selected. Installation is easy - simply plug the receiver unit into any indoor outlet. Plug your lamp into the receiver. Install a 9-volt battery (not included) into the remote. A quick push of the button will turn lamp on and off. Hold the button down for dimming feature. Perfect light level each and every time!

Features:

* Turn lamp on/off and dim with remote
* Easy installation-plugs into any standard
indoor outlet
* Memory retains last dimming level selected
* Full dimming range
* Available in A or B frequency
* 50 foot range, requires 9-volt battery